Castaldo VLT


Very Low Temperature!
As low as 71°C -160°F 
Rapid Molds from Rapid Prototypes!
Computer to Production In Hours, Not Days!

Make high-volume production molds Directly from CAD/CAM and Rapid Prototyping models Fast without risk of damage from heat or pressure.

VLT® brings to manufacturers what has been missing so far inthe CAD/Cam revolution - speed!   Get your models into production in as little as 30 minutes!

VLT vulcanizes at temperatures as low as 160°F / 71°C, makingit ideal for creating tough, strong long-lasting production rubber molds directly from all types of plastic resin models. Makes great molds from traditional wax carvings too!

VLT produces highly detailed wax injections with an extrodinarily shiny surface that requires less finishing. Waxes are self-releasing and need no release spray. Molds are easy to pack and easy to cut. Rubber shrinkage is only 0.1%.

VLT Silicone Molding Rubber is provided in two convienient sizes. • Regular: Strips 18" x 2 7/8" x approximately 3/8" (45.7cm x 7.3cm x approximately 6mm) and packaged in 5lb. cartons ( 2.27kg).  • Double-wide: Strips 18" x 5 3/4" x approximately 3/8" (45.7cm x 14.5cm x approximately 6mm) and packaged in 10lb. / cartons (4.5kg).

A standard size mold vulcanizes at: 88°C / 190°F for 30 minutes  • 82°C / 180°F for 45 minutes  • 76°C / 170°F for 60 minutes  • 71°C / 160°F for 90 minutes.

Go to the Using VLT web site page.
Instruções em Inglês
How To Use VLT (PDF)
VLT article on the topic of direct casting from CAD/CAM models. 2004 AJM INNOVATION AWARD WINNER " The wait IS over!!!!"
by John Shanahan from the August 2005 issue of AJM.
reprinted coutesy of Objet Geometries Inc.
Folha de Instruções em Inglês
Retornar a página do menu em Português
VLT® (Em İngilizce) GHS EUGHS





 












 


Copyright © 1991-2017 F. E. Knight Inc. ALL RIGHTS RESERVED